You Make These 14 Plastering Mistakes?
If you’re like most people, you probably don’t give much thought to the plastering in your home. But if you’re not careful, you could be making some serious mistakes that could lead to problems down the road.
Here are 14 of the most common plastering mistakes:
1. Not Prepping The Surface Properly
Before you start plastering, it’s important to make sure the surface is clean, dry and free of any debris. Otherwise, the plaster won’t adhere properly and could start to peel or flake off over time.
2. Applying Too Much Pressure
When applying plaster, be sure to use even pressure. Applying too much pressure can cause the plaster to crack or break, while not enough pressure will result in an uneven finish.
3. Not Using The Right Tools
If you’re not using the right tools, you could end up with an uneven or messy finish. Be sure to use a clean, dry trowel or sponge when applying plaster.
4. Skipping The Primer
A lot of people make the mistake of skipping the primer step when plastering. But if you want a smooth, professional-looking finish, it’s important to use a primer before applying the plaster.
When you’re working with plaster, it’s important to apply a primer before painting or wallpapering. Otherwise, the plaster may not adhere properly and could start to peel.
5. Skipping The Sanding
After you’ve applied primer, it’s essential to sand the surface before painting or wallpapering. This will create a smooth finish and help the paint or wallpaper adhere better.
6. Applying The Plaster Too Thick Or Thin
Another common mistake is applying the plaster too thick or thin. If it’s too thick, it will take longer to dry and could crack or peel. If it’s too thin, it won’t provide adequate coverage.
7. Not Allowing The Plaster To Dry Completely
If you don’t allow the plaster to dry completely before painting or applying another finish, it could start to peel or flake off. Be sure to follow the manufacturer’s instructions and allow the plaster to dry completely before proceeding.
8. Applying A Second Coat Too Soon
If you apply a second coat of plaster before the first coat is completely dry, you could end up with an uneven finish. Be sure to wait until the first coat is completely dry before applying a second coat.
9. Not Using Joint Tape
If you’re not using joint tape, you could end up with cracks in your plaster. Joint tape is used to reinforce the joints between sheets of drywall or plasterboard.
10. Not Using Enough Screws
If you’re not using enough screws, the plaster could start to peel or flake off over time. Be sure to use enough screws so that the plaster is securely attached to the wall.
11. Using The Wrong Type Of Paint
If you use the wrong type of paint, it could start to peel or flake off. Be sure to use paint that is specifically designed for use on plaster walls.
12. Not Using A Sealer
Before painting or wallpapering, it’s important to apply a sealer to the plaster surface. This will help protect the plaster from moisture and other damage.
13. Applying Wallpaper Directly To Plaster
Wallpaper can be applied directly to plaster, but it’s important to use a high-quality wallpaper that is designed for use on plaster surfaces. Otherwise, the wallpaper may not adhere properly and could start to peel.
14. Not Following The Instructions
It’s important to follow the instructions on the products that you’re using. Otherwise, you could damage the plaster or create an unsafe situation.
Following these simple tips, you can avoid making common mistakes that could lead to problems with your plaster.
If you are looking for a plastering company, check out Plastering National residential.